When using a bong, it is essential to keep it clean and clean it regularly, not only to ensure pure smoke but also to prolong the life of the glass bong. So today we're going to explain how to clean your bong.
Prepare the tools and materials for cleaning the bong.
The materials needed to clean a bong are roughly as follows:
alcohol, coarse salt, cleaning brush, rubber stopper, multiple ziplock bags, paper towels or absorbent cloths.
5 Steps to cleaning your bong
Step 1, removing bong accessories
The first step in cleaning your bong is to disassemble it so that you can clean all the parts separately. Depending on the type of waterpipe you have, you can remove the bowl, downpipe, ash trap, and so on. Place the parts carefully when removing them to avoid breaking the glass parts due to impact.
Step 2, Cleaning, Soaking, Descaling
After taking the bong apart, rinse each part with hot water. Initially, remove some dirt attached to the surface to facilitate the next step of cleaning.
After completing the initial cleaning, pour a generous amount of coarse salt into the bottom of the water pipe and then pour in enough isopropyl alcohol to cover the salt. Seal the opening of the bong with a rubber stopper to prevent the contents from spilling out when you shake the bong. If you don't have a rubber stopper, you can also put a bag over the opening and tie a leather strap to secure it. Shake the bong vigorously to allow the salt and alcohol mixture to clean the inside of the hookah. Then place the bowl and downstem into separate bags, adding salt and enough isopropyl alcohol to cover it. Seal the bags and then shake each bag separately. Shake for about 30 seconds and then let them soak for a while. Repeat this step several times if necessary until the inside of the bong is clean.
Step 3, rinse thoroughly
If your bongs look clean after the above steps, rinse them in hot water to remove any remaining salt/alcohol. Rinse thoroughly to ensure all residue is removed. If there are still some stains, you can use a cleaning brush to partially scrub them.
Step 4, drying
Dry your glass bong and accessories thoroughly with a paper towel. Make sure each piece is dry before reassembling your bong.
Step 5, reassemble the bong
Reassemble the pieces together, making sure they are tight and secure.
Once you've completed the bong cleaning process, you'll be ready to enjoy a cleaner, fuller, fresher smoke. Go ahead and give it a try.

(Glass Bongs Manufactured By Luziguang Company)





